Custom Pull-Up Bar E2
Prices incl. VAT plus shipping costs
Delivery time 7 Workdays
- Einfache und schnelle Montage
- Robust und pflegeleicht
- Rutschfestes Material
- Order number: E2-VA-.1
Transforming the hallway into an inconspicuous fitness room with the Pull-Up Bar E2
A simple, robust, and versatile pull-up bar that enables many exercises and remains visible daily makes every pull-up training doubly effective.
The pull-up bar E2 enables almost all conceivable pull-up variations and fits into any standard hallway, between two beams, or two posts that are no more than 200 cm apart. For those seeking such a training device, the pull-up bar E2 is the ideal choice.
The pull-up bar E2 features exactly what is necessary for an effective pull-up workout - a horizontal tube acting as the bar and two wall mounts that are fully welded together. This makes the construction highly robust, even allowing for muscle-ups.
Overall, the pull-up bar E2 is a simple and durable piece of equipment, custom-made in Germany by professional welding experts.
The required length of the E2 is determined individually and specified during the ordering process. Measuring the length is straightforward and described in detail below.
How is the length of the pull-up bar E2 measured?
The distance is measured directly at the two mounting points using two folding rules.
Specific measurement procedure (Recommendations)
-
First, the two mounting points on the wall, i.e., the specific height at which the bar should hang, must be determined as precisely as possible.
-
The first folding rule is placed exactly on the mounting point on the first wall, and the second folding rule is placed exactly on the opposite mounting point on the second wall.
-
The total distance is read as the sum of two distances on both folding rules (i.e., a random point is defined on the overlapping folding rules, for example at 1000 mm measured from the left, and then the length on the other folding rule is added).
-
A deduction of 3 mm is made from the measured total distance. If necessary, the distance is measured multiple times (e.g., 3 times), an average is calculated, and then the 3 mm are deducted.
Important: A deduction of 3 mm must be made from the measured length to ensure the perfect fit of the pull-up bar. The required length must be measured as precisely as possible between the two desired mounting points, as walls are often not perfectly built or plastered.
The distance between the walls frequently varies by 2 - 6 mm depending on the chosen measuring points. If two folding rules are unavailable, the distance can also be determined with just one folding rule. However, this is more tedious than working with two rules. More information on determining the length can also be found in this blog post.
Measurement and calculation example: The measured length is 1470 mm. The length after deducting 3 mm is 1467 mm (calculated as a difference: 1470 mm - 3 mm = 1467 mm). Thus, 1467 mm is specified as the desired length when ordering.
Determining the length with a laser distance meter
If the length is to be determined using a laser distance meter, the actual total distance must be measured 3 - 5 times at the desired mounting location. The laser distance meter should always be shifted by approximately 5 mm in different directions (up, down, left, and right), and then the average of the measured lengths is calculated.
Specific procedure for measuring with a laser distance meter (Recommendations)
-
The laser distance meter is placed on a mounting point on one wall, turned on, and the measured distance is read.
-
The laser distance meter is shifted by approx. 5 mm upwards, downwards, to the left, and to the right, reading the measured distance each time.
-
An average is calculated from the five measured total lengths.
-
Subsequently, 3 mm are deducted from the average.
The most important features of the pull-up bar E2
The pull-up bar E2 is fully welded to the two wall plates, meaning its Ø 30 mm tube, with a wall thickness of 3 mm, is embedded into the 15 cm x 8 cm wall mounts and welded on both sides. From a length of 150 cm, the E2 is manufactured as a tube-in-tube construction. This ensures a load capacity of up to 150 kg for all lengths up to 200 cm, as well as a 20-year warranty on the pull-up bar.
-
Material: premium, rust-resistant stainless steel
-
Design: practical, clear, and minimalist at the same time
-
Construction: robust and fully welded - no assembly required
-
Length: Custom individual length
-
Mounting: four screws
-
Surface: ground
-
Load capacity: up to 150 kg
-
20-year warranty on welds (more on request)
Advantages of the pull-up bar E2
-
Ample clearance for a wide variety of exercises
-
Optimal dimensions for every pull-up training and body size
-
Highest safety and load capacity up to 150 kg
-
Extremely long lifespan
-
Expert quality with professional welds
-
24/7 availability, making regular assembly and disassembly of the pull-up bar obsolete
-
Very easy expandability with sling trainers, resistance bands, fitness mats, and gymnastic rings to create a personal fitness room, home gym, or fitness corner
Dimensions
-
Width x Depth x Height: individual length x 15 cm x 8 cm
-
Tube diameter: Ø 30 mm (outer)
-
Tube wall thickness: 3 mm
-
Mounting plates (new design as of April 2021): 15 cm wide, 8 cm high, 4 mm thick, with two 10 mm holes each
-
Hole diameter: Ø 10 mm
Technical Details
-
Condition: New
-
Made in: Germany
-
Number of individual parts: 1 piece
-
Construction: fully welded; from 1500 mm length, a fully welded tube-in-tube construction
-
Number of holes for screws: 4 pieces, Ø 10 mm
-
Surface: ground, grit size 240
-
Weight: 5 - 10 kg
-
Scope of delivery: 1 x pull-up bar E2, mounting hardware optionally included, partially depicted frame not included.
Additional Information
Assembly instructions: Operating and assembly instructions as PDF
Customer Gallery for the Pull-Up Bar E2
Below, several customer photos of the pull-up bar E2 are displayed. If the quality is convincing, submitting a picture of the installed pull-up bar is highly appreciated. Other users of this page will certainly be delighted by the inspiration.
Custom-made Pull-Up Bar E2 for mounting from above on a beam
A minimalist pull-up bar for mounting from above between two beams was requested. With this type of mounting, the drill holes for the screws would not be directly visible if the pull-up bar were removed later. This requirement was implemented relatively easily (see the production image below showing the special mounting plate).
Pull-up bar E2 mounted in a staircase
A customer image demonstrates that the pull-up bar E2 also fits perfectly into a staircase. Here too, the pull-up bar was manufactured exactly to the required custom length.
Pull-up bar E2 between two beams, mounted in the bathroom
The pull-up bar E2 can also be mounted directly in the bathroom, as shown in the following customer image. This is highly practical for stretching the back or performing pull-ups during the morning routine, for example. The challenge with this specific model was welding the right plate at the required angle. After a few adjustments, the necessary angle, the dimensions of the beams, and the distance between the beams were successfully determined.
Pull-up bar E2: Space-saving solution for muscle-ups
The customer image below illustrates how the pull-up bar E2 can be utilized to create a small calisthenics park at home. For this setup, a wooden beam was first mounted vertically to the ceiling, and then the lower end of the beam was connected to both walls. Two E2 models (1000 mm and 1740 mm), attached to the beam at a 90° angle, function as robust connecting pieces.
Is mounting hardware included in the scope of delivery?
Yes and no, as it can be selected optionally. Mounting hardware can also be added separately to the shopping cart here.
Is there an optimal mounting height? How high above the floor should the pull-up bar hang?
Yes, ideally the pull-up bar should hang 30% above the individual's body height. In this case, the floor will no longer be touched while hanging. This means, for example, for a body height of 1.8 m, the pull-up bar should hang 2.34 m above the floor. Generally, the following formula applies: Ideal mounting height = Body height x 1.3. If the room height does not allow for this, the legs must be bent slightly during use.
Where can the pull-up bar E2 be mounted at home?
The pull-up bar E2 can be mounted between any sturdy walls. All hallways with a width of up to 200 cm are highly suitable for this, as shown in the example image below.
It is crucial that the measured length is reduced by 3 mm. Otherwise, it will not be possible to position the pull-up bar horizontally at the mounting location. The remaining clearance of 1.5 mm on each side disappears when the wall plates are screwed on, as they bend towards the wall during tightening and then lie completely flat.
What is the diameter of the pull-up bar and how thick is the material?
The diameter of the pull-up bar at all grip areas is 3 cm or 30 mm. The wall thickness of the tube is 3 mm. From a length of 1500 mm, the pull-up bar is manufactured as a fully welded tube-in-tube construction to guarantee exceptional rigidity even up to a span of 200 cm.
Is the bar knurled, roughened, or polished?
All grip areas are unknurled and not roughened. They are brushed or ground with a grit size of 240. This means the surface offers slightly more grip and is rougher than a polished finish.
Can the pull-up bar also be mounted between wooden posts or on wood?
Yes, by using screws with a wood thread and without dowels. The wood should be pre-drilled, using a 3 to 4 mm drill bit for 8 mm screws. The wood or beam must be sturdy and provide a sufficiently large contact area for the mounting plates. The drill holes should be placed approximately 2 cm away from the edge to prevent the wood from splintering.
Can the concrete mounting set also be used on a wooden beam?
Yes, but the dowels are not required for this type of installation. The 8 mm hanger bolts included in this set also feature a wood thread and can be screwed directly into the wood. For this purpose, the wood simply needs to be pre-drilled with a 3 to 4 mm wood drill bit.
Is the person's weight included in the maximum load capacity of 150 kg?
The maximum load capacity refers to the maximum possible weight that the user is permitted to apply to the bar.
Is the pull-up bar also suitable for outdoor use?
Yes, the pull-up bar can be utilized outdoors as well as indoors, as it is manufactured from premium, rust-resistant stainless steel.
It should be noted that the pull-up bar must not be installed in a maritime atmosphere, i.e., in close proximity to a sea or an ocean (e.g., the North Sea coast, the Baltic Sea coast, or the Atlantic coast).
Can the pull-up station also support a punching bag? Does the pull-up bar hold a punching bag as well?
Yes, a punching bag can be attached to the pull-up bar without any issues. This can be done directly on the tube using a round sling and a carabiner. To prevent the punching bag from slipping, an eyelet can additionally be welded to the pull-up bar, as seen here: Pull-up bar with one or more eyelets.
Is the pull-up bar also available in white or another color?
No, the pull-up bar is currently not available in white or any other painted finish.
Is the actual pull-up bar made of solid steel?
No, the pull-up bar itself consists of a highly durable tube with a wall thickness of 3 mm.
How deep do the screws go into the wall?
The hanger bolts measure 8 x 60 mm. The dowels measure 10 x 50 mm. Consequently, the screws penetrate a solid 50 mm into the wall.
