Custom Pull-Up Bar E4 | Removable Stainless Steel Bar | EN - klimmzugstangen.de

Preview: Custom Pull-Up Bar E4 | Removable Stainless Steel Bar

Custom Pull-Up Bar E4 | Removable Stainless Steel Bar

€168.00 *

Prices incl. VAT plus shipping costs

Delivery time 7 Workdays

wähle deine individuelle Länge:

Länge

Anzahl gewünschter Befestigungshöhen:

Für jede Höhe sind je zwei Wandplatten notwendig

Befestigung-Set:

Stockschrauben, Hutmuttern, Dübel und Unterlegscheiben

Einfache und schnelle Montage
Robust und pflegeleicht
Rutschfestes Material

Order number: E4-VA-.1

Item Stainless steel pull-up bar E4 - removable, designed for mounting in a hallway,... more

Close menu

Product information "Custom Pull-Up Bar E4 | Removable Stainless Steel Bar"

Item	Stainless steel pull-up bar E4 - removable, designed for mounting in a hallway, corridor, or passageway
Description
Grip width	Depends on the custom individual length
Permitted use	Suitable exclusively for a careful and vibration-free execution of standard pull-ups. Resistance bands and power tubes must not be used in conjunction with this model.
Grip variations	A total of two (wide and/or narrow)
Difficulty of pull-ups	Very difficult to moderately difficult (depending on grip width)
Maintenance	Absolutely maintenance-free and wear-free
Construction	Removable, three-part stainless steel construction, consisting of 1 x tube and 2 x U-shaped wall mounts.
Load capacity	Up to 120 kg
Individual Length
Made-to-measure length	Custom individual length, manufactured exactly according to provided measurements
Maximum length	1980 mm
Note on custom length	The custom length must be provided after deducting 3 mm. A deduction of 3 mm from the measured distance is required to ensure the pull-up bar fits perfectly between the walls. Calculation example: Measured distance 1300 mm - 3 mm to ensure fit = custom length 1297 mm. The distance should be measured directly at the two designated mounting points using two folding rules. Specific measurement procedure (Recommendations) First, the two mounting points on the wall, i.e., the exact height at which the bar is to be installed, must be determined as precisely as possible. The first folding rule is placed exactly on the mounting point on the first wall, and the second folding rule is placed exactly on the opposite mounting point on the second wall. The total distance is read as the sum of the two distances on both folding rules (i.e., a random point is selected where the rules overlap, for example at 1000 mm measured from the left, and then the length on the other folding rule is added). A deduction of 3 mm is made from the measured total distance. If necessary, the distance is measured multiple times (e.g., 3 times), an average is calculated, and then the 3 mm are deducted. Important: A deduction of 3 mm from the measured length is strictly necessary to guarantee the perfect fit of the pull-up bar. The required length must be measured as accurately as possible between the two desired mounting points, as walls are frequently not perfectly constructed or plastered. The distance between the walls often varies by 2 - 6 mm depending on the selected measuring points. If two folding rules are unavailable, the distance can alternatively be determined using just one folding rule. However, this method is significantly more tedious. Further information on determining the correct length can be found in the corresponding blog post. Determining the length with a laser distance meter If the length is to be determined using a laser distance meter, the actual total distance must be measured 3 - 5 times directly at the designated mounting location. The laser distance meter should be shifted by approximately 5 mm in various directions (up, down, left, and right) for each measurement, and an average of the measured lengths must then be calculated. Specific procedure for measuring with a laser distance meter (Recommendations) The laser distance meter is placed on a mounting point on one wall, activated, and the measured distance is read. The laser distance meter is shifted by approx. 5 mm upwards, downwards, left, and right, and the measured distance is recorded each time. An average is calculated from the five recorded total lengths. Finally, 3 mm are deducted from this average. If the walls are insulated, the E4 can still be mounted, provided the insulation is not too thick, the distance can be bridged with sleeves, or the insulation is removed from the mounting points so that the brackets rest directly on the masonry. In such cases, prior contact regarding the specific insulation thickness is required.
Construction notes	The tube is inserted into the U-shaped wall brackets from above. Since each wall bracket is 8 mm thick, the pull-up bar rests on the tabs for 13 mm (6.5 mm on each side) when the 3 mm deduction is applied. The tube of the E4 does not rotate. However, it is secured against upward movement. This means the tube can potentially jump out of the brackets in the event of excessive swinging, careless use, or when utilizing resistance bands/power tubes. Important: The E4 should only be ordered if the ability to remove the tube is absolutely essential. If removing the tube after use is not strictly necessary, the pull-up bar E2 is highly recommended - which is essentially the fully welded, fixed version of the E4 designed for hallways.
Technical data
Material	Stainless steel (DIN 1.4301)
Tube	Ø 30 mm, wall thickness t=2 mm, ends are welded to the removable tab
Surface	Ground / brushed
Wall plates	6 cm high and 15 cm wide, t=8 mm
Distance between drill holes	2.5 cm (outer edge, from the right and left side), 3 cm (vertically centered), 10 cm (center-to-center between holes)
Additional grips	None
Weight	2.5 kg (at a length of 110 cm)
General information
Condition	New
Manufacturer	klimmzugstangen.de
Made in	Germany
Warranty	10 years on welds
Mounting	Suitable exclusively for a horizontal mounting location between two points, e.g., between two walls in a hallway, corridor, passageway, or between two posts.
Mounting instructions	Available as a PDF download
Mounting hardware	Optional, not included in the standard scope of delivery

Related links to "Custom Pull-Up Bar E4 | Removable Stainless Steel Bar"

Is mounting hardware included in the scope of delivery? Yes and no, as it can be selected... mehr

Menü schließen

Is mounting hardware included in the scope of delivery?

Yes and no, as it can be selected optionally. Mounting hardware can also be added separately to the shopping cart here.

Is there an optimal mounting height? How high above the floor should the pull-up bar hang?

Yes, ideally the pull-up bar should hang 30% above the individual's body height. In this case, the floor will no longer be touched while hanging. This means, for example, for a body height of 1.8 m, the pull-up bar should hang 2.34 m above the floor. Generally, the following formula applies: Ideal mounting height = Body height x 1.3. If the room height does not allow for this, the legs must be bent slightly during use.

In the event of relocation, is it possible to order only the new bar (with new custom dimensions) without the wall brackets? Is the price reduced in this case?

Yes. A new pull-up bar can be manufactured in the corresponding length. The old bar can also be accepted as a trade-in (minus the costs for refurbishment).

Where can the pull-up bar E4 be mounted?

The pull-up bar E4 can be mounted between any sturdy walls. All hallways, passageways, or rooms with a width of up to 198 cm are highly suitable for this purpose.

It is crucial that the measured length is reduced by 3 mm. This ensures that the pull-up bar can always be brought from a diagonal position into a horizontal position at the designated mounting location.

What is the diameter of the pull-up bar and how thick is the material?

The diameter of the pull-up bar at all grip areas is 3 cm or 30 mm. The wall thickness of the tube is 3 mm. From a length of 1500 mm, the pull-up bar is manufactured as a fully welded tube-in-tube construction to guarantee exceptional rigidity even for these lengths.

Is the bar knurled, roughened, or polished?

All grip areas are unknurled and not roughened. They are brushed or ground with a grit size of 240. This means the surface offers slightly more grip and is rougher than a polished finish. If necessary, magnesium can be used to increase grip.

Can the pull-up bar also be mounted between wooden posts or on wood?

Yes, by using screws with a wood thread and without dowels. The wood should be pre-drilled, using a 3 to 4 mm drill bit for 8 mm screws. The wood or beam must be sturdy and provide a sufficiently large contact area for the mounting plates. The drill holes should be placed approximately 2 cm away from the edge to prevent the wood from splintering.

Can the concrete mounting set also be used on a wooden beam?

Yes, but the dowels are not required for this type of installation. The 8 mm hanger bolts included in this set also feature a wood thread and can be screwed directly into the wood. For this purpose, the wood simply needs to be pre-drilled with a 3 to 4 mm wood drill bit.

Is the person's weight included in the maximum load capacity of 120 kg?

The maximum load capacity refers to the maximum possible weight that the user is permitted to apply to the bar.

Is the pull-up bar also suitable for outdoor use?

Yes, the pull-up bar can be utilized outdoors as well as indoors, as it is manufactured from premium stainless steel.

It should be noted that the pull-up bar must not be installed in a maritime atmosphere, i.e., in close proximity to a sea or an ocean (e.g., the North Sea coast, the Baltic Sea coast, or the Atlantic coast).

Can the pull-up station also support a punching bag? Does the pull-up bar hold a punching bag as well?

Yes and no. Since the bar rests loosely in the wall brackets, it could potentially jump out during the use of a punching bag. Given this risk, such an application is not recommended. Specifically: The bar is not approved for this type of use.