Customer Gallery

A customer photo is worth a thousand words. Let this page inspire you with the results of our work and possible mounting locations - and convince yourself of our quality and versatility!

We would also be absolutely thrilled to receive your customer photo! Simply send it to us and it will eventually appear here. Just take out your smartphone, turn on your camera, take a photo, and send it to info AT klimmzugstangen.de. Done! Besides us, others who are trying to decide whether to buy a cheap product or true quality will also appreciate it.

In general, our pull-up bars can be mounted almost anywhere. In our experience, the best mounting locations are rooms you use daily, e.g., the bathroom, the living room, or the hallway.

Otherwise, you can easily install our pull-up bars in your home fitness corner, your home gym, your box, or even your commercial gym.

Below you can see both standard models and several custom-made models. The customer photos at the very bottom are probably over 10 years old by now. The newest customer photos are at the top.

Cuboid pull-up bar and other products in a home gym

Pull-up bar D4 in a dressing room

Pull-up bar E1

Pull-up bar E2 for wooden beams - custom-made to measure with two additional grips

Pull-up bar G4 attached to a beam with lashing straps

Pull-up bar D2: Polished finish
(Surface finish completed by the customer / polishing company for yacht fittings)

Pull-up bar E2: Space-saving solution for muscle-ups

Pull-up bar P4 with stainless steel gymnastic rings (produced for a customer in Toronto, Canada)

Pull-up bar G1 attached to a patio roof - with lashing straps and completely without drilling

 

Pull-up bar E2 (for a hallway) as a custom order for mounting (from above) on a beam

Powder-coated ceiling pull-up bar based on the D2 model as a custom version (Powder coating was done by the customer)

Pull-up bar G1 for beams - for mounting without drilling and screwing

  

Pull-up bar W1 as a custom order (with 890 mm distance between the struts) for mounting above a door

Pull-up bar for an H-beam mounted with clamping plates

Ceiling pull-up bar - Model D2 - wrapped with foam grip tape

Note: Please keep in mind that the foam cover was applied by the customer for a softer grip. Strictly speaking, this is not necessary. The surface of the pull-up bar is sanded and already offers a good and comfortable stainless steel feel.

Custom pull-up bar for a power rack (L-brackets are exactly 1150 mm apart in the center, made for a customer from Mannheim)

Pull-up bar W4 as a custom order with 20 x 10 cm wall plates (produced for a customer from Zagreb, Croatia)

Pull-up bar E2 as a custom order - with an angled welded bracket

Pull-up bar E2 in a staircase

Removable pull-up bar E4 for a hallway, corridor, or passageway

Pull-up bar D4 after adjustment for a wooden beam

Pull-up bar for mounting between two beams - custom order

Ceiling pull-up bar for a bathroom/shower, custom-made with extra long struts, two eyelets, and rubber grips

Pull-up bar for beams with straight ends and without additional grips, mounted in the roof truss, for Frank Meier, construction technician & master carpenter, Biederbach

Special order pull-up bar, based on the P-model, for a sloped gallery ceiling

Base model: Pull-up bar E2

Ceiling ladder / Monkey bars

Dr. Dreh Pull-up bar - rotating - for outdoors or indoors

Configurator ceiling pull-up bar

Custom order: Pull-up bar E2 with two parallel grips and bent ends

Pull-up bar E2 between two wooden beams

Pull-up bar for beams as a custom order

Latissimus bar, pull-up bar L2

Pull-up bar E2

Pull-up bar D1

Pull-up bar L4

Pull-up bar W4

Pull-up bar or traverse for wall bars

Pull-up bar E2 on a staircase

Weight plate holder

Pull-up bar D4

Pull-up bar D4 - attached to a metal beam

Pull-up bar L3 - for a Freeletics group in Berlin

Corner pull-up bar, pull-up bar for a room corner - custom order

Plywood gymnastic rings, square H1 holders and cuboid pull-up bar on the ceiling

Custom order for a roof truss

Muscle Up pull-up bar - on an exterior house wall

Pull-up bar W1 with straight ends - above a door

Pull-up bar B2 on a wooden beam (1/2)

Pull-up bar B2 on a wooden beam (2/2)

Pull-up bar W2 and dip bars in an outdoor area on a wall

Hanging pull-up bar (pull-up bar L4 on a wooden beam)

Pull-up bar W4 on a galvanized H-beam, mounting plates 100 x 100 mm

Pull-up bar W1 on a garage, tube length 110 cm

W2 model - straight tube, mounting plates 100 x 100 mm, distance from the balcony 400 mm (1/2)

W2 model - straight tube, mounting plates 100 x 100 mm, distance from the balcony 400 mm (2/2)

Active Office pull-up bar - Pull-up bar D4 in an office

Simple fitness room based on a pull-up bar D4

Pull-up bar W4 with a 120 cm long tube (Picture 1/2)

Pull-up bar W4 with a 120 cm long tube (Picture 2/2)

Pull-up bar XXL (Fight & Fitness Club in Aalen, Picture 1/2)

Pull-up bar XXL (Fight & Fitness Club in Aalen, Picture 2/2)

Meditating on the pull-up bar - W1 in combination with gravity boots

Pull-up bar B4A - custom model for wooden beams (Picture 1/2)

Pull-up bar B4A - custom model for wooden beams (Picture 2/2)

Pull-up bar D4 (between wooden paneling)

Pull-up bar D2 on a concrete ceiling (Picture 1/2)

Pull-up bar D2 on a concrete ceiling (Picture 2/2)

Pull-up bar D4 on a wooden beam

Pull-up bar W4 on a wall

Pull-up bar W2 (at the Volunteer Fire Department Essen-Margarethenhöhe)

Pull-up bar D4 as a mount for a suspension trainer

Pull-up bar W1 as a custom order for a swing

Winner of our Facebook contest 2013

Pull-up bar D4 in a bedroom

Pull-up bar E2 in a bathroom

Pull-up bar W4 as a custom order for a wooden beam with square mounting plates

Pull-up bar D2 - custom order, ceiling distance 25 cm, between struts 55 cm

Pull-up bar W2 brass-plated (the brass plating was not done by us)

Pull-up bar W2 as a custom order

Pull-up bar W4 as a custom order (stainless steel bead-blasted surface)

Pull-up bar D2 with long struts in a bathroom