Pull-Up Bar Configurator Design a custom pull-up bar for ceiling mounting using this pull-up... more

Product information "Custom Ceiling Mount Stainless Steel"

Pull-Up Bar Configurator

Design a custom pull-up bar for ceiling mounting using this pull-up bar configurator!

This is the pull-up bar configurator for D-models. It allows for the configuration of a custom ceiling-mounted pull-up bar exactly according to individual requirements and specifications.

Important configuration options:

First, the base model is selected: four, two, or no additional grips.
The desired distance from the ceiling is defined – options range from 300 mm, 350 mm, 400 mm up to 650 mm.
The ceiling distance refers to the total length of the strut into which the bar is inserted and welded. With a 300 mm strut, the exact distance between the ceiling and the upper edge of the tube is 268 mm. This measurement always refers to the straight section of the pull-up bar. The ends of the bent bar sections are located approximately 100 mm lower.
The width of the pull-up bar is selected: 1180 mm or 1080 mm.
The bend of the ends is determined: 30° bent or straight.
The number of eyelets is selected: without eyelets, 1 central eyelet, 2 eyelets, or 3 eyelets.

Product Details:

Material: Premium, rust-resistant stainless steel
Design: Practical, straightforward, clean, and minimalist
Construction: Extremely robust, fully welded – no assembly required
Tube ends: Fitted with matching blanking plugs
Load capacity: Up to 500 kg
20-year warranty on welds (more on request)

Dimensions:

Width x Depth x Height: 108 or 118 cm x 29 cm x 38 cm
Tube diameter: Ø 30 mm
Maximum grip width: 108 or 118 cm
Length of additional grips/parallel grips: 13 cm
Distance between parallel grips: 23 cm or 60 cm
Mounting plates: Ø 150 mm, each with 4 drill holes
Drill hole diameter for screws: Ø 10 mm

Technical Details:

Condition: New
Made in: Germany
Number of individual parts: 1 piece
Construction: Fully welded
Total drill holes for screws: 8 pieces, Ø 10 mm
Surface: Ground, grit size 240
Color: Silver
Weight: 8 kg

Additional Information

How to determine mounting height: The perfect height for a pull-up bar

Mounting instructions: Video or PDF

Safety: Information on the stability of the pull-up bars

Further information: Custom modifications in the blog

Related links to "Custom Ceiling Mount Stainless Steel"

Where is the eyelet welded onto the pull-up bar? Option 1 eyelet: The eyelet is welded... mehr

Menü schließen

Where is the eyelet welded onto the pull-up bar?

Option 1 eyelet: The eyelet is welded centrally to the pull-up bar, on the underside of the tube, facing downwards and aligned longitudinally to the tube.

Option 2 eyelets: The eyelets are welded to the left and right sides of the pull-up bar, aligning with the width of the struts.

Option 3 eyelets: Two eyelets are welded to the left and right sides of the pull-up bar, aligning with the width of the struts, and one additional eyelet is welded centrally.