Outdoor Pull-Up Bar A1

From €749.00 *

Prices incl. VAT plus shipping costs

Einfache und schnelle Montage
Robust und pflegeleicht
Rutschfestes Material

Order number: 00A1-VA-2P

Item Pull-up bar A1 - for outdoor installation Technical specifications... more

Close menu

Product information "Outdoor Pull-Up Bar A1"

Item	Pull-up bar A1 - for outdoor installation
Technical specifications
Manufacturer	klimmzugstangen.de
Material	Stainless steel (DIN 1.4301)
Surface	Ground / brushed
Posts	Square tube (100 x 40 x 2 mm) featuring 10 drill holes. Each hole contains a welded-in tube sleeve with an inner diameter of 12.5 mm to prevent rainwater from penetrating the posts and to ensure maximum stability. Rainwater inside the posts can lead to severe frost damage to the outdoor gymnastics equipment during the cold season.
Tube	Length 1400 mm, diameter 30 mm, wall thickness 3 mm. Two threaded bolts (M12 thread) are welded into the ends for a secure screw connection.
Dimensions & Mounting	Total post height: 3000 mm Tube length: 1400 mm Two M12 screws (including two washers)
Bar height settings	When the posts are set in concrete at a depth of 50 cm into the ground: Maximum height: 245 cm Intermediate heights: 230 cm, 215 cm, 200 cm, 185 cm, 170 cm, 155 cm, 140 cm, 125 cm Minimum height: 110 cm
General information
Condition	New
Construction	Multi-part assembly
Warranty	20 years on welds
Load capacity	Up to 150 kg per section
Mounting instructions	Available for download as a PDF
Mounting hardware	Included in the scope of delivery (two M12 screws)
Mounting advice	For setting the posts in concrete, a solid foundation of at least 50 x 50 cm and a depth of 80 cm should be poured into the ground.
Shipping weight	30 kg

Related links to "Outdoor Pull-Up Bar A1"

Does the A1 base tower come with two pull-up bars as shown in the illustration? If so, is it... mehr

Menü schließen

Does the A1 base tower come with two pull-up bars as shown in the illustration? If so, is it possible to purchase the tower with only one pull-up bar?

The A1 base tower consists of a single pull-up bar supported by two pillars - the illustration depicts the base tower already expanded with an additional attachment. The A1 base tower can be selected separately via a drop-down menu and ordered directly.

Is mounting hardware included in the scope of delivery?

Yes, the mounting hardware for securing the pull-up bar to the two pillars is included in the scope of delivery.

Is there an optimal mounting height? How high above the ground should the pull-up bar hang?

Yes, ideally the pull-up bar should hang 30% above the individual's body height. In this case, the ground is no longer touched while hanging. This means, for example, for a body height of 1.8 m, the pull-up bar should hang 2.34 m above the ground. Generally, the following formula applies: Ideal mounting height = Body height x 1.3. If the ceiling or available height does not permit this, the legs must be bent slightly during the exercise.

What is the diameter of the pull-up bar?

The diameter of the pull-up bar at all grip areas is 3 cm or 30 mm.

Is the pull-up bar / horizontal bar knurled, roughened, or polished?

The actual horizontal bar is unknurled and not roughened. The bar is brushed or ground with a grit size of 240, meaning it offers slightly more texture and is rougher than a polished surface.

Does the maximum load capacity of 150 kg include the person's weight?

The maximum load capacity refers to the absolute maximum weight that the user is permitted to apply to the equipment.

Is the pull-up bar also suitable for outdoor use?

Yes, the pull-up bar can be utilized outdoors as well as indoors, as it is manufactured from premium stainless steel.

It should be noted that the pull-up bar must not be installed in a maritime atmosphere, i.e., in close proximity to a sea or an ocean (e.g., the North Sea coast, the Baltic Sea coast, or the Atlantic coast).