Custom Pull-Up Bar S4

Pull-up bar S4 with 4 additional grips - for rafter clearances of up to 800 mm.

The pull-up bar S4 enables pull-up training directly beneath a rafter roof. It is suitable for all rafters with clearances of up to 800 mm.

Offering up to five grip variations and up to seven pull-up variations, the pull-up bar S4 is perfectly suited for individual home training, bodyweight exercises, and calisthenics.

Manufactured from highly resilient and rust-proof stainless steel, the pull-up bar S4 features a total of four additional grips (two additional/parallel grips on each side of the bar). The total length of the pull-up bar is 118 cm with a tube diameter of Ø 30 mm. The struts are 35 cm long, 5 cm wide, and 8 mm thick. On one side, they are rounded and welded to the pull-up bar on both sides. On the other side, they terminate in square 10 x 10 cm mounting plates. The 5 cm wide section of the struts has a length of 25 cm.

The S4 consists of a single piece; i.e., it is fully welded and does not require any assembly from individual parts.

The maximum load capacity of the pull-up bar S4 is 350 kg.

A 20-year warranty is provided for the pull-up bar S4.

Manufactured to the highest quality standards, the pull-up bar S4 withstands extreme loads and is virtually indestructible. Even a fire in the roof structure would not affect the functionality of the pull-up bar.

Important note: The pull-up bar S4 is manufactured with millimeter precision to fit the specific clearance between the rafters. Therefore, the individual rafter clearance must be selected when ordering. The clearance at the designated mounting location should be measured in advance, preferably multiple times. Please note that the pull-up bar is a custom-made product and is excluded from exchange and return.

The most important features of the pull-up bar S4

• Material: Premium, rust-proof stainless steel

• Design: Practical, straightforward, clean, and minimalist

• Construction: Extremely robust, fully welded - no assembly required

• Tube: Bent, ends fitted with matching blanking plugs

• Additional grips: Four

• Mounting: Eight screws

• Surface: Ground / brushed

• Load capacity: Up to 350 kg

• 20-year warranty on welds (longer warranty possible upon request)

Further advantages included with the pull-up bar S4

• Optimal dimensions for any pull-up and calisthenics training

• Maximum clearance around and beneath the pull-up bar for a wide variety of exercises

• Highest safety and load capacity of up to 350 kg

• Exceptionally long lifespan

• Finest craftsmanship by professionals with expert welds

• 24/7 availability

• Very easy expandability with sling trainers, resistance bands, fitness mats, and gymnastic rings to create a personal fitness room or home gym beneath the roof rafters

Dimensions

• Width x Depth x Height: 118 cm x 29 cm x 42 cm

• Tube diameter: Ø 30 mm

• Maximum grip width: 118 cm

• Length of additional grips/parallel grips: 13 cm

• Distance for wide parallel grip: 60 cm

• Distance for narrow parallel grip: 23 cm

• Strut width and thickness: 50 mm and 8 mm

• Strut length: 350 mm, 250 mm up to the mounting plates

• Mounting plates: 100 x 100 mm, each with 4 drill holes

• Drill hole diameter for screws: Ø 10 mm

Technical Details

• Condition: New

• Made in: Germany

• Number of individual parts: 1 piece

• Construction: Fully welded

• Total drill holes for screws: 8 pieces, Ø 10 mm

• Tube ends: Closed with blanking plugs

• Surface: Ground, grit size 240

• Color: Silver

• Weight: 8 kg

Scope of Delivery

• 1 x pull-up bar S4

• Mounting hardware not included (but can be ordered here)

Additional Information

Mounting instructions: Video or PDF

Safety: Information on the stability of the pull-up bars

Further information: Custom modifications in the blog