Today, like every year, we did our warehouse inventory. Everything went as usual—with one difference: unlike in previous years, I've now taken pictures of all the special stock, samples, and B-stock items.
Most of this special stock has accumulated over the year for various reasons. But there are also a few items that have been sitting in our warehouse for a bit longer. That doesn't need to be the case, of course. For that reason, and with the motto "Everything Must Go," we're offering our special stock for sale in this post.
If you're interested in a sample or a B-stock item, just send us an email, preferably with a quick reference to the picture. We've listed the price in the title of each item. Compared to the new price of the corresponding pull-up bars, gymnastic rings, or other A-stock items, you can get the special stock offered here at a discount of 20%, 30%, or even 50%. In other words, we're offering some real bargains from our warehouse. However, there are also a few models that are more expensive than our standard models, as more work went into them.
You can assume that all items shown below are still available; if not, we will mark or update the description or photo accordingly.
As you'd expect from us, every pull-up bar offered for sale here is made of stainless steel and is perfectly suited for pull-ups. You can find information on installation and the perfect height for the pull-up bars here. An overview of our standard models can be found here.
D1 Pull-Up Bar for Ceiling, Knurled, 450 mm distance from ceiling, 108 cm bar length: Price 98 EUR Was reserved but then not sold. Will now be sold as part of the 2019 Inventory Special Deal (as of 01/02/2020)
The pull-up bar is very good. The knurling on it is also good—in fact, it's too good. It's way too rough for normal hands and pull-ups. This means you'll only be able to do pull-ups on this bar with workout gloves, or you'll have to wrap the knurled areas with tape.
W2 Pull-Up Bar for Wall, Knurled, 350 mm distance from wall, 108 cm bar length: Price 98 EUR
This wall-mounted pull-up bar is also very good. However, it has several different types of knurling, from coarse to medium to fine. Overall, the knurling on this bar is also too rough for normal hands and pull-ups. This means you'll only be able to do pull-ups on this bar with workout gloves. The other option is to wrap the knurled areas with tape.
D2 Pull-Up Bar with welded ends - the "Prison Version", 108 cm bar: Price 120 EUR - Sold!
I don't remember the story behind this pull-up bar anymore. I just know that a few years ago, we made some pull-up bars for a prison. The prison's requirement was that the ends shouldn't have plastic caps but should be welded shut so that nothing could be hidden inside. It's possible we made one too many. So this would be the leftover stock from that prison delivery.
D4 / W4 Pull-Up Bar for Ceiling or Wall, glass-bead blasted surface: Price 98 EUR. All Sold.
We offered glass-bead blasted pull-up bars several years ago. This year and last year, we took in one glass-bead blasted pull-up bar each as a trade-in for a new one. We often get requests like this from people who are moving and need to swap a ceiling model for a wall model, or vice versa. Since both pull-up bars show signs of use, we're offering them here for about 50% off.
DIY Pull-Up Bar, length 920 mm, with angled parallel grips: Price 30 EUR
We made this pull-up bar for a customer. After we finished it, we realized we had welded the angles incorrectly. Without much thought, we just made a new one. If you're looking for a cheap pull-up bar for posts in your garden, you won't find a cheaper one than this.
Electropolished Pull-Up Bar for Wall or Ceiling, length 120 cm: Price 270 EUR - Already sold!
These are two electropolished pull-up bars (one for the ceiling, the D4 Pull-Up Bar, and one for the wall, the W4 Pull-Up Bar). Both pull-up bars look really good. They reflect light much better than brushed pull-up bars. The grip is still great. The pull-up bars are flawless and new. The price increase compared to the base models is due to the cost of electropolishing.
Sample Z2 Pull-Up Bar, take-down model for wall or ceiling: Price 98 EUR - Already sold!
We developed the Z2 Pull-Up Bar years ago. During development, we also make prototypes. These are those prototypes, specifically the Z2 mounts as a prototype. They are basically the same Z2 mounts as in the standard Z2, except that they have a material thickness of 10 mm or 6 mm. The pull-up bar is stable with both thicknesses. In the end, however, we decided on the 6 mm version with a slightly changed design, which we now offer as standard.
Pull-Up Bar for Purlin Mounting, 450 mm distance, Price: 180 EUR
Unfortunately, I don't remember the backstory of this pull-up bar anymore. In any case, for this model, we used 450 mm long struts, small mounts (100 x 100 mm, with 4 holes each) for a wooden beam or a metal support, and a completely normal pull-up bar, without grips. The pull-up bar is new, packaged, and unused.
Wall-Mounted Pull-Up Bar (W1, W2, or W4) as B-Stock: Price 100 EUR per pull-up bar
Our welders make mistakes every now and then. A possible mistake can be seen in the picture below. Specifically, the wall plates are welded to the struts incorrectly, so the unpolished side is visible. The polished, visible side, on the other hand, rests against the wall, which is not ideal visually.
In total, we have six of these "feet" and can still weld any W-model with them. But in the end, the unpolished side will be visible, no matter how well we weld. However, this won't affect your pull-ups. For this reason, we are selling the yet-to-be-built wall-mounted pull-up bar with these mounts for a price of 100 EUR.
Two Wall-Mounted Pull-Up Bars, 140 cm long: Price 150 EUR per pull-up bar
A few years ago, we made two extra-large pull-up bars for a sponsorship event. Each pull-up bar is 140 cm wide. Unfortunately, the sponsorship event never happened, so the pull-up bars are sitting in our warehouse. The pull-up bars are new and unused, but they have an engraving in the middle of the bar. We would have to remove the engraving. The bar would then have a slight unevenness. However, this would not affect the performance of pull-ups. Overall, the pull-up bar is very well suited for tall people. So if you are 6' 7" (2 m) or taller, this pull-up bar would be perfect for your pull-ups.
First photo based on the photo by Justin Lim on Unsplash. All other photos by klimmzugstangen.de