W-Model as a Custom Order
Prices incl. VAT plus shipping costs
- Einfache und schnelle Montage
- Robust und pflegeleicht
- Rutschfestes Material
- Order number: 00W1SA-VA-.1
Want to do pull-ups? Use this pull-up bar configurator to build your own wall-mounted pull-up bar!
This is our pull-up bar configurator for W-models. Use it to assemble a wall-mounted pull-up bar according to your wishes and needs.
First, select the base model, which can have four, two, or no additional grips. Then, set the desired distance from the wall - 200 mm, 250 mm, 300 mm, 350 mm, 400 mm, and 450 mm are possible. Next, choose the width of the pull-up bar. Two lengths are available here: 1180 mm or 1080 mm. In the second to last step, determine the bend of your pull-up bar's ends: 30° bent or straight.
For all base models, the distance between the narrow additional grips is 23 cm, and between the wide additional grips is 60 cm.
Finally, select the number of eyelets on the pull-up bar. The options are: no eyelet, 1 center eyelet, 2 eyelets, 3 eyelets.
If you select one eyelet, we will place it in the middle of the pull-up bar, on the lower edge of the tube, facing down and lengthwise to the tube. If you select two eyelets, we will place them not in the center, but on the left and right of the pull-up bar at the width of the struts. We place three eyelets 1x in the center, 1x on the left under the strut, and 1x on the right under the strut.
The delivery time for the configured pull-up bar is 2 - 3 weeks after receipt of payment. Important: We do not have the configured product in stock. We manufacture it exclusively for you!
You can find custom-made products we have already manufactured on our customer photos page.
If a standard model would also suit you, you can find the complete overview in our pull-up bars category.
These are the most important features of the configurator pull-up bar for the ceiling
- Material: high-quality, rust-resistant stainless steel
- Design: practical, no-frills, clean, and minimalist at the same time
- Construction: extremely robust, fully welded - no assembly required
- Tube ends: fitted with matching finishing plugs
- Fastening: eight screws
- Surface: ground finish
- Load capacity: up to 500 kg
- 20-year warranty on welds (more on request)
Also included with the assembled pull-up bar for the ceiling
- Maximum free space around and under the pull-up bar for a variety of exercises
- Highest safety and load capacity up to 500 kg
- Very long service life
- Quality from a specialist with professional welds
- 24/7 availability on the ceiling, making regular setup and takedown unnecessary
- Very easy to expand with a suspension trainer, resistance band, fitness mat, and gymnastic rings to create a personal fitness room, home gym, or fitness corner
Dimensions
- Width x Depth x Height: 108 or 118 cm x 20 or 25, 30, 35, 40, 45 cm x 38 cm
- Tube diameter: Ø 30 mm
- Maximum grip width: 108 or 118 cm
- Length of additional/parallel grips: 13 cm
- Distance between parallel grips: 23 cm or 60 cm
- Strut width and thickness: 50 mm and 8 mm
- Mounting plates: 300x50 mm, each with 4 holes
- Diameter of holes for screws: Ø 10 mm
Technical Details
- Condition: new
- Made in: Germany
- Number of individual parts: 1 part
- Construction: fully welded
- Number of holes for screws: 8 pieces, Ø 10 mm
- Tube ends: sealed with finishing plugs
- Surface: ground, 240 grit
- Color: silver
- Weight: 8 kg
Additional Information
How to determine mounting height: Perfect height for a pull-up bar
Installation instructions: Video or PDF
Safety: Information on the stability of our pull-up bars
More information: Custom orders on our blog
Kundenbilder - Klimmzugstange für die Wand als Sonderanfertigung
Das sind Kundenbilder der Klimmzugstange für die Wand als Sonderanfertigung (W-Modell als Sonderanfertigung). Du möchstest auch eine Klimmzugstange als Sonderanfertigung von uns oder hast bereits eine von uns gefertigt bekommen? Dann würden wir uns über dein Kundenbild auch sehr freuen. Sende es uns einfach per E-Mail zu und wir stellen es hier rein.
Gerade Klimmzugstange für einen Power Rack mit L-Haltern
Diese Klimmzugstange haben wir als Ergänzung für einen Power Rack gefertigt. Gesucht war eine sehr stabile Klimmzugstange, die auch das Rack (wenn ich mich nicht täusche, von ATX) richtig zu versteifen sollte.
Das Besondere an der Klimmzugstange: Die L-Halter sind aus 12 mm starkem Flachstahl. Die Klimmzugstange selbst ist eine Rohr-in-Rohr-Konstruktion, d.h. in die Klimmzugstange haben wir ein zweites Rohr eingeschoben und mit der äußeren Klimmzugstange verschweißt. Die Bohrungen zwischen den beiden L-Halter sind mittig genau 1150 mm auseinander. Die Ausleger sind aus 12 mm Flachstahl und genau 376 mm lang.
